Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Fort Lauderdale?
In Fort Lauderdale, chimney cap and crown work typically costs between $190 and $2,100 depending on whether you need a simple cap replacement, a custom cap fabrication, or a full crown rebuild. A standard prefabricated chimney cap with installation runs $190 to $460, while a poured concrete crown replacement usually lands between $850 and $1,900. Custom stainless steel caps for unusual flue configurations or multi-flue setups in older Fort Lauderdale homes generally fall in the $350 to $1,200 range.
Those numbers cover the most common jobs we price in this market. What you actually pay depends on your chimney’s condition, the materials involved, and whether the crown needs a simple patch or a complete tear-out and repour. Below is the full breakdown with line-item pricing so you can see exactly where your money goes.
Key Takeaways:
- Chimney cap replacement in Fort Lauderdale: $190 to $460 for standard galvanized or stainless caps
- Custom stainless caps for oversized or multi-flue chimneys: $350 to $1,200
- Crown repair (patching cracks): $250 to $650
- Full crown tear-out and repour: $850 to $1,900
- Combined cap and crown jobs on the same visit save $75 to $150 in mobilization costs
- Every price we quote is written down before work starts, no exceptions
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what we’re actually charging in the Fort Lauderdale market in 2026, broken down by line item. These ranges reflect what we’ve quoted on homes from Victoria Park to Coral Ridge to Plantation over the past year.
| Job Type | Typical Price Range | What’s Included |
|---|---|---|
| Standard galvanized cap replacement | $190 – $320 | Cap, mounting hardware, installation, debris removal |
| Standard stainless steel cap replacement | $260 – $460 | Cap, hardware, installation, debris removal |
| Custom stainless cap (single flue) | $350 – $650 | Fabrication, mesh screening, installation |
| Custom stainless cap (multi-flue or oversized) | $650 – $1,200 | Fabrication, mesh screening, multi-flue mounting |
| Crown crack sealing (small repairs) | $250 – $450 | Surface prep, sealant, crack filling |
| Crown patch and resurfacing | $450 – $750 | Cleaning, patching compound, waterproof sealant coat |
| Full crown tear-out and repour | $850 – $1,900 | Demolition, form building, concrete pour, curing sealant |
| Cap + crown combined job | $400 – $2,100 | Both services, single mobilization cost |
What drives the cost up or down:
Roof pitch is the single biggest variable in Fort Lauderdale. A one-story ranch in Riverland with a gentle 4/12 pitch is easy to access, keeps labor cost low, and usually lands at the bottom of these ranges. A two-story Mediterranean-style home in Rio Vista with a steep tile roof requires ladder stabilization, sometimes a roof harness, and extra setup time. That pushes labor higher, not materials.
Crown condition matters more than most homeowners expect. If the existing crown has hairline cracks and the concrete is still structurally sound, a patch job solves it for $250 to $450. But we see a lot of Fort Lauderdale crowns that have been absorbing salt air and tropical downpours for 20-plus years. When the concrete has spalled, crumbled at the edges, or pulled away from the flue tile, a patch won’t hold. That means a full tear-out and repour, and you’re now at $850 or more.
Material selection is the third driver. Galvanized caps work fine and cost less up front, but in Fort Lauderdale’s salt-heavy air, they typically corrode in 5 to 8 years. Stainless caps cost more and last significantly longer. We quote both, explain the tradeoff, and let you decide. The price you approve is the price on the invoice.
What Affects Chimney Cap & Crown Pricing in Fort Lauderdale
Here are the factors that actually move the number on a cap and crown quote in this market, in order of how often they come up:
- Roofline accessibility. Single-story homes with low-slope roofs in neighborhoods like Croissant Park and Tarpon River are straightforward. Two-story homes with barrel-tile roofs in Las Olas Isles or Harbordale take more setup, more safety equipment, and more time. Labor cost reflects the difference.
- Crown material and condition. A crown with minor cracking needs a sealant job. A crown that’s crumbling, delaminating, or missing chunks needs a repour. The price difference between those two scenarios is usually $500 to $1,200.
- Cap material. Galvanized steel is cheaper. Stainless steel is more expensive up front and outlasts galvanized by roughly double in coastal air. Custom sizes or multi-flue caps add fabrication cost because they’re built to order, not pulled off a shelf.
- Flue configuration. A single-flue chimney takes a standard cap. A chimney with three flues, or one with an odd sizing from a 1970s build in Plantation or Davie, needs a custom stainless fabrication. That adds $200 to $600 over a standard replacement.
- Water damage already present. If a failed crown has let water into the chimney chase or the flue lining, the repair scope expands. We flag what we find, quote it separately, and never add work without written approval.
- Time of year. Fort Lauderdale has two peak chimney service windows: October through December ahead of holiday fire season, and May through July when afternoon thunderstorms expose leaks. Booking outside those windows is easier, though our pricing stays consistent year-round.
How to Save on Chimney Cap & Crown
The most effective way to control cost is to combine the cap and crown on a single visit. If you need both, doing them together eliminates a second mobilization, a second roof setup, and a second round of safety prep. That typically saves $75 to $150 off what two separate trips would cost.
Second, act on early signs. A hairline crack in a crown sealed for $300 today is a $1,200 repour in three years if Fort Lauderdale’s rainy season keeps working on it. Water intrusion doesn’t fix itself, and in this climate with 60-plus inches of annual rainfall, a compromised crown degrades faster than it would inland.
Third, get the chimney inspected at the same time. If we’re already on the roof for a cap, the inspection cost is minimal to add, and you’ll catch flue issues before they become structural. We do not charge for estimates, and the price for cap and crown work is always written and approved before any tools come off the truck. Call (754) 354-1430 and we’ll schedule a time that works.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap replacement cost in Fort Lauderdale?
A standard chimney cap replacement in Fort Lauderdale runs $190 to $460 installed, depending on whether you choose galvanized or stainless steel. Custom caps for oversized or multi-flue chimneys start at $350 and can reach $1,200. Call (754) 354-1430 for a written quote based on your actual chimney, free of charge.
How much does a chimney crown repair cost?
Chimney crown crack sealing and small repairs cost $250 to $450 in Fort Lauderdale. Resurfacing a more deteriorated crown runs $450 to $750. A full tear-out and repour starts at $850 and tops out around $1,900 for large or difficult-access crowns.
Is it cheaper to repair or replace a chimney crown?
If the crown has surface cracks and solid concrete underneath, repair is cheaper: $250 to $450 versus $850 and up for a full repour. But if the concrete has spalled or pulled away from the flue, repair won’t hold, and you’d pay twice. We’ll tell you which camp your crown falls in before we quote anything.
How long does a chimney cap last in Fort Lauderdale’s climate?
A galvanized cap lasts 5 to 8 years near the coast before salt air accelerates corrosion. Stainless caps typically last 15 to 20 years in the same conditions. The salt content in Fort Lauderdale’s air is the main factor, not normal wear and tear.
Can you install a chimney cap and crown on the same visit?
Yes, and it’s the most cost-efficient approach if you need both. Combining the two jobs saves $75 to $150 in setup and mobilization costs versus scheduling them separately. Call (754) 354-1430 with your address and we’ll give you a written price for the full scope before any work starts.
Why Fort Lauderdale Homeowners Call Flint Chimney Co
We have been working on chimneys since 2002 as part of the Garrison Partners family of independently owned chimney service companies. Our crew in Fort Lauderdale runs on The Garrison Standard, which means one thing: everything goes in writing before work begins. The price, the scope, the materials, the time window. If it’s not written, it doesn’t count.
Every repair we complete, including every cap and crown job, carries the 365-Day Done Right Promise: a written guarantee valid for one full year from the service date. If a covered repair fails within that year, we return at no charge. No arguments, no re-inspection fees, no fine print gymnastics. That guarantee is in writing on every repair invoice, including cap installations and crown repours.
When you book with us, a background-checked, uniformed technician arrives at the scheduled window. We use professional-grade materials from brands you can verify independently: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. The cap or crown we install gets specified by what your chimney needs, not by what pads our margin.
To learn more about our broader Chimney Cap & Crown in Fort Lauderdale service area and what a full inspection covers, or to understand everything else we do starting from the home page, you can read through our service details any time. But pricing questions are best answered directly by phone.
Written by Hank Delano, Owner at Flint Chimney Co Fort Lauderdale. Hank has led chimney service operations in the Fort Lauderdale market and oversees every cap and crown project under The Garrison Standard.
Pricing reflects the Fort Lauderdale market as of 2026. Flint Chimney Co Fort Lauderdale offers free estimates, guaranteed written pricing, and repair coverage backed by the 365-Day Done Right Promise – call (754) 354-1430 to schedule or get a quote.
What Our Customers Say
"Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H.