Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Fort Lauderdale, FL | Flint Chimney Co Fort Lauderdale
A Chimney Sweep in Fort Lauderdale for DuraFlex runs $189 to $289, and we do these every week. The thing that separates our DuraFlex work from anyone else’s in this city is simple: we know what salt air does to stainless liners, and we check for it before we ever put a brush up the flue. Flint Chimney Co Fort Lauderdale is an independent DuraFlex service provider, not a manufacturer-authorized shop, and we’ve been cleaning and inspecting these liners across Fort Lauderdale for years. Call (754) 354-1430 for a written quote before any work starts.
Why Fort Lauderdale Residents Choose Us for DuraFlex Service
Hank Delano built Flint Chimney Co on a rule that fits DuraFlex work in Fort Lauderdale better than anywhere: tell them what you found, tell them what it costs, then do the work clean. We service more DuraFlex liners than any independent shop in the area, which means we see how this brand actually behaves after five, ten, fifteen years of South Florida humidity and salt. Our technicians are background-checked and uniformed, and every job gets a written price before a tool comes off the truck. We use genuine DuraFlex sales & service components for structural parts like couplers and top plates, because fit matters on a liner. When you’re dealing with a 50-year-old masonry chimney in Fort Lauderdale, the last thing you need is a crew guessing at the condition of the thing carrying smoke out of your house. We don’t guess. We inspect, we document, and we show you what we found.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Fort Lauderdale
Every chimney in Fort Lauderdale fights the same three things: humidity, salt, and rain. DuraFlex liners handle them better than most, but they’re not immune. Here’s what we actually find on service calls:
- Pitting and corrosion on 316L liners near the coast. Fort Lauderdale’s salt-laden air settles on the liner top and inside the first few feet of flue. Condensation holds that salt against the stainless, and over time the 316L alloy pits. We see it most often on homes east of US-1 and within a mile or two of the Intracoastal. A rotary cleaning with the right head gets the creosote, but the pitting itself tells us whether the liner is still safe or needs replacement.
- Creosote glaze buildup on corrugated inner walls. DuraFlex liners have a corrugated profile that holds creosote more readily than smooth-wall pipe, and Fort Lauderdale’s humidity makes that creosote sticky and glazed rather than flaky and dry. Even light fireplace use over a “winter” of occasional burns can leave a hard glaze that a flat wire brush won’t remove. We use rotary cleaning with poly or steel heads sized to the liner, which is what it takes to get DuraFlex actually clean here.
- Tears at the top connection from wind-driven rain. Fort Lauderdale gets serious afternoon thunderstorms, and when wind slams rain sideways into a chimney chase, the liner top takes the hit. We regularly find the top three to six inches of a DuraFlex liner corroded, torn, or pulling away from the top plate. If we find that, we say so and we show you the photo before recommending anything.
- Sagging liners in tall ranch-home chimneys. Many Fort Lauderdale ranches from the 1950s and 60s have tall single-flue chimneys, and a DuraFlex liner that wasn’t properly supported during install can sag over time. That sag creates a gap at the tee or top plate, which lets exhaust and moisture into the chase. Our Level 2 inspection covers this with a camera, not a guess.
- White crust near the top of the liner. That white crust is salt and mineral deposits left behind when salt-laden condensation evaporates. It’s common on Fort Lauderdale liners, and it’s a warning sign that the top plate or cap isn’t sealing properly. We don’t just chip it off and call it done; we trace where the moisture is getting in, and we quote the fix in writing.
DuraFlex Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Here’s the insight that matters for DuraFlex owners in Fort Lauderdale specifically. In the neighborhoods east of US-1, like Victoria Park and Poinsettia Heights, most homes were built with original clay flue liners. Those clay liners crack from thermal shock and decades of humidity, and a lot of homeowners retrofit DuraFlex liners to solve the problem without rebuilding the chimney. But the existing chimney often lacks a proper top plate, so our cleaning crews regularly find the liner top corroded and salt-crusted, requiring cap replacement before any sweep can safely proceed. That pattern, a retrofit DuraFlex liner with a failing top plate, is the single most common issue we see in those older Fort Lauderdale neighborhoods, and it shapes how we clean every liner east of US-1. We check the top plate and cap first, because if they’re compromised, the sweep has to wait until they’re fixed. It’s a sequence that saves time and prevents water from being pushed deeper into the chimney during cleaning.
DuraFlex Models & Products We Service in Fort Lauderdale
We service the full DuraFlex liner range in Fort Lauderdale, including the DuraFlex 316L stainless liner, the DuraFlex AL29-4C stainless liner for high-efficiency gas appliances, the DuraFlex Pro 316Ti liner, and the DuraFlex Smooth Wall liner. Our parts approach is straight: genuine DuraFlex couplers and top plates for structural connections, and equivalent stainless aftermarket fasteners and caps where they perform the same at a better price. For common Fort Lauderdale failures like corroded top plates and missing rain caps, we keep standard sizes stocked locally, which means less waiting on a distributor’s truck. When we recommend replacement, it’s because the liner is genuinely done, not because it’s easier than repairing.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Fort Lauderdale
A standard DuraFlex chimney cleaning in Fort Lauderdale runs $189 to $289, depending on fireplace type, liner condition, and access. If you need a Level 2 camera inspection, add $149 to $199. Creosote glaze removal on a heavily used or neglected DuraFlex liner may add $50 to $100 for the rotary work. For comparison, liner replacement due to corrosion typically starts around $2,500, so annual cleaning is dramatically cheaper than waiting until the liner fails. We also perform chimney waterproofing as a separate service, with exterior crown and masonry sealing typically running $350 to $600 depending on chimney size and access. Every quote is written down before work begins. Call (754) 354-1430 for a free estimate, and you’ll know the number before we schedule anything.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Fort Lauderdale
Yes. Homes within about two miles of the coast in Fort Lauderdale deal with salt-laden condensation that accelerates both creosote accumulation and liner corrosion. Even a lightly used fireplace near the beach should be swept at least once a year, and we recommend a Chimney Inspection in Fort Lauderdale with Level 2 camera work every two to three years so you can see the liner’s actual condition. Call (754) 354-1430 to schedule, and we’ll give you a written quote before any work.
In most cases, yes. A cracked clay flue in a Victoria Park home can be relined with a properly sized DuraFlex liner without tearing down the chimney. The key is the top plate and crown condition. If the crown is cracked and leaking, we repair or replace the top plate first, because installing a liner under a failing top plate just moves the water problem to the new liner. We inspect, we show you the photos, and we quote the reline in writing.
That white crust is salt and mineral residue from condensation evaporating off the liner top. It’s a sign that the top plate or rain cap isn’t sealing tightly, and in Fort Lauderdale it shows up fast. We don’t just scrape it off; we find the moisture entry point and quote the cap or top plate repair in writing before we proceed.
For wood-burning fireplaces in Fort Lauderdale, we generally recommend the DuraFlex Smooth Wall liner. The smooth interior builds creosote less readily than the corrugated profile, and in our humid climate, less creosote means less glaze and easier cleaning over time. The corrugated 316L is fine for many applications and is what we clean most often, but for a new wood-burning reline, smooth-wall is the better long-term choice.
It depends on what the camera shows. If the liner body is sound and only the top connection is compromised, we replace the top plate and cap, repair the crown, and keep the liner in service. If the corrosion has traveled more than a foot or two down the liner, replacement is usually the more cost-effective call. Either way, you get the decision based on photos from a Level 2 inspection, not a guess. Call (754) 354-1430 for an inspection quote.
Service Areas Near Fort Lauderdale
Our crews cover Fort Lauderdale and the surrounding cities, including Fort Lauderdale service area neighborhoods like Victoria Park, Poinsettia Heights, and Coral Ridge. We also run routes through DuraFlex service in Oakland Park, DuraFlex service in Davie, Lauderdale-by-the-Sea, Sunrise, and Tamarac. If you’re within a 30-minute drive of Fort Lauderdale, we can get to you.
Book Your DuraFlex Service in Fort Lauderdale Today
Call (754) 354-1430 and you’ll get a live person on the line, not a voicemail. We’ll ask a few questions, give you a written price range, and schedule a time that works. Your DuraFlex liner in Fort Lauderdale needs an annual cleaning to stay safe, and the sooner you book, the sooner we can show you exactly what condition it’s in.
Written by Hank Delano, Owner at Flint Chimney Co Fort Lauderdale, serving Fort Lauderdale and surrounding cities since 2002.