Famco Chimney Inspection Nationwide

Famco Chimney Inspection in Fort Lauderdale: What to Know First

A Famco chimney inspection in Fort Lauderdale typically costs $189 – $349 depending on the level and whether we use a camera, and most inspections are completed within 90 minutes on site. We are an independent Famco service provider, not a Famco dealer or authorized rep, which means we call problems exactly as the camera shows them, not as a sales target dictates. If you own a Famco fireplace, stove, or venting component in Fort Lauderdale and want a straight answer about its condition, this page tells you what we look for, what it costs, and how the process runs. Call (754) 354-1430 to book an inspection.

Call (754) 354-1430

How Famco Products Fail – and How We Fix Them

Famco builds solid equipment, but South Florida humidity and salt air do things to metal that drier climates never see. Here is what we find on Famco jobs across Fort Lauderdale, from Victoria Park to Rio Vista and out toward Plantation:

• Galvanized flue cap rust-through on Famco vent terminations. The factory caps hold up fine for years, but coastal moisture eventually eats through the galvanizing where the cap lip meets the flue pipe. The symptom is a faint metallic drip stain running down the exterior chimney chase or water pooling at the appliance adapter. We replace with a 304 stainless cap sized to the existing Famco flue diameter, not an ill-fitting universal part.
• Locking seam separation on Famco B-vent sections. Famco double-wall B-vent relies on a locking bead that can loosen after repeated thermal cycling. We spot this on older single-family homes near Las Olas and in mid-century construction throughout Fort Lauderdale. The seam opens just enough to vent flue gas into the chase. Our fix is either reseating and banding the joint or swapping the affected section for new Famco-compatible vent pipe.
• Draft issues traceable to undersized Famco flue on converted fireplaces. When a Fort Lauderdale homeowner removes a gas log set and goes back to burning wood, the existing Famco flue is sometimes too small for the new burn rate. The owner sees smoke rolling into the room and blames the damper. It is usually the flue cross-section. We measure, document, and recommend a liner resizing rather than fiddling with the damper.
• Condensation corrosion at Famco appliance adapters. Gas appliances in air-conditioned Fort Lauderdale homes produce more condensate in the vent stack than the same unit in a colder climate. That acidic moisture sits at the adapter joint and accelerates pitting. We inspect Famco adapter fittings closely on every Level 2 inspection and replace any that show wall thinning before they crack.
• Chase top flashing failure around Famco terminations. The flashing is rarely Famco-branded, but it attaches to the Famco termination. Salt air in Fort Lauderdale corrodes unsealed flashing within three to five years. Water gets past the flashing, runs down the outside of the Famco pipe, and stains the ceiling below. We pull the cap, inspect the flashing, and reseal with a polyurethane sealant rated for Florida coastal exposure when the metal is still sound.

Our Famco Chimney Inspection Process

Every Famco inspection we run in Fort Lauderdale follows the same sequence, whether it is a pre-purchase real estate check or a homeowner who smelled something off. The process is the same because skipping steps is how problems get missed.

1. 1
   You call (754) 354-1430. A live person answers, takes your address, and asks what Famco appliance or venting you have and what made you call. We book a window that works.
2. 2
   The tech arrives and walks the outside first. We check the Famco termination, cap, flashing, and chase for rust, separation, or animal entry before we ever step inside.
3. 3
   Interior inspection at the appliance level. We document the Famco vent run from the appliance collar up, checking every joint, support, and the firestop where the pipe passes through the ceiling.
4. 4
   Camera scope of the flue interior. This is where we find what the naked eye cannot: cracked liner panels, seam separation hidden inside the Famco B-vent, or creosote loading in a wood-burning setup. You see the footage with us, in real time.
5. 5
   Written findings and a written price. Before any repair is discussed, you get a plain-English report of what we found and what it means. If repair is needed, the price is in writing before we touch a tool.
6. 6
   Cleanup and the 365-Day Done Right Promise. We leave the job site the way we found it. If we repair something and it fails within one full year, we come back at no charge. That is the guarantee, in writing, every time.

What Famco Chimney Inspection Costs in Fort Lauderdale

Most Famco homeowners in Fort Lauderdale pay between $189 and $349 for a chimney inspection. That range covers a Level 1 visual inspection at the low end up to a Level 2 camera inspection at the high end. A Level 3 inspection, which involves opening walls or chasing to access hidden Famco vent sections, runs higher and is priced per job after we see the access situation. If we find a repair while we are there, the repair price is separate and always delivered in writing before we start. You will never get a surprise invoice from us. Call (754) 354-1430 for an exact quote on your Famco setup; the estimate is free.

Why Fort Lauderdale Homeowners Call Flint Chimney Co Fort Lauderdale for Famco Work

We have been cleaning and inspecting chimneys across South Florida long enough to know what Fort Lauderdale humidity does to metal venting, and we have seen enough Famco equipment to know its failure patterns before we even climb the ladder. When a Famco component is shot, we tell you. When it has years left, we tell you that too. We work with professional-grade materials including DuraFlex liners, HeatShield resurfacing systems, and Gelco chimney caps, so if a repair involves more than a Famco part swap, we use components we can stand behind for a full year in writing. Our techs show up background-checked and in uniform, and a live person answers our phone day and night. That is how we run every job under The Garrison Standard.

FAQs