DuraFlex Chimney Sweep Nationwide

DuraFlex Chimney Sweep in Fort Lauderdale: What to Know First

We handle DuraFlex chimney sweep work in Fort Lauderdale as an independent service provider. A standard DuraFlex sweep and Level 1 inspection typically runs $189 – $329, and most jobs are completed the same day the crew arrives. The honest answer on parts: if your DuraFlex liner is intact after cleaning, you pay for the sweep and nothing else.

Call (754) 354-1430

This page is for homeowners in Fort Lauderdale, Oakland Park, Wilton Manors, and Plantation who already have a DuraFlex liner installed and want a chimney sweep that actually knows the product. You won’t get a generic brush-and-vacuum crew here. Hank Delano and the Flint Chimney Co Fort Lauderdale team have pulled apart enough DuraFlex systems in South Florida to know exactly where they collect creosote, where they corrode, and what’s worth fixing versus replacing. Call (754) 354-1430 for a free estimate, and we’ll put the price in writing before anything comes off the truck.

How DuraFlex Products Fail – and How We Fix Them

DuraFlex makes a solid liner system, but Fort Lauderdale’s humidity and salt air change how these liners behave. Here’s what we actually see on service calls, and what we do about it.

• DuraFlex 316L stainless liners pitting at the flue base. Fort Lauderdale’s coastal moisture condenses inside the liner after a burn, then sits at the bottom where the liner connects to the appliance. On 316L alloy liners, that standing condensate starts pitting the metal within three to five seasons. During a sweep we inspect the first 12 inches above the tee with a camera. If we catch pitting early, a professional-grade corrosion inhibitor and adjusted burn habits can buy you years. If it’s already perforated, we tell you plainly and show you the footage.
• DuraFlex AL29-4C liner creosote glaze, not flakes. This isn’t a defect, it’s chemistry. AL29-4C is a ferritic stainless alloy made for high-efficiency gas and oil applications, but when it gets used on wood-burning appliances in humid climates, creosote bonds differently than on clay tile. Instead of flaky Stage 1 buildup, you get a hard, shiny glaze that a standard wire brush just polishes. We use a rotary chain head on those jobs, and in some cases a chemical treatment first. A standard sweep without the right head won’t remove it. You’ll pay for half a cleaning and still have the glaze.
• DuraFlex Smooth Wall liner catching at the seam welds. Smooth Wall liners are popular in Fort Lauderdale condos and townhomes where owners want improved draft. The trade-off: the internal seams give creosote a ledge to collect on. We see buildup concentrating where the spiral-wound seam meets the next section, especially in the upper third of the chase where the liner is coolest. A visual-only inspection from the bottom misses this, which is why our Level 2 on any DuraFlex Smooth Wall job includes a full-height camera pass.
• Rain cap mesh clogging on DuraFlex terminations. Here’s a Fort Lauderdale-specific one. The fine mesh on standard DuraFlex rain caps, the kind installed to keep birds and embers out, clogs fast with salt-laden dust and pollen from March through October. A clogged mesh restricts draft, which means more smoke backing into the house and more creosote deposition in the upper liner. During every sweep we pull the cap, clean the mesh, and check for any signs of critter entry around the termination. Five minutes of work that prevents a lot of callbacks.
• DuraFlex liner-to-flue tile gaps shifting after hurricane season. South Florida ground shift and high-wind storms can move a masonry chimney just enough to break the seal where a DuraFlex liner transitions into the existing clay tile flue. The symptom: water streaking on the firebox wall after heavy rain, or a draft smell between burns. On a sweep we check that transition point with the camera and reseal it when needed. If you skip this, you’re looking at masonry repairs later, which cost a lot more than the sweeps do.

Our DuraFlex Chimney Sweep Process

1. 1
   Call and talk to a person. You call (754) 354-1430, and a real person answers. We ask for the basics: how old the liner is, when it was last swept, what appliance it serves. Then we schedule a window and stick to it.
2. 2
   Arrival and cover-up. Our technician shows up in uniform, lays drop cloths from the entry to the firebox, and runs a HEPA-filtered vacuum during the entire job. No creosote dust on your mantel, no soot tracked across your floors.
3. 3
   Camera inspection first. Before any brush touches your liner, we run the camera from the appliance connection to the termination cap. You get to see the footage, and we tell you exactly what we’re looking at. No mystery recommendations.
4. 4
   The sweep. We match the brush head and speed to your specific DuraFlex liner type and the creosote stage we found. The goal is clean metal without scoring the liner surface.
5. 5
   Part replacement, only if needed. If we find a failed rain cap, a cracked tee connection, or a damaged section, we quote OEM DuraFlex parts first, then discuss quality aftermarket options when they make sense. The written quote is in your hand before any repair work starts.
6. 6
   Final camera pass and written report. We run the camera again so you can see the finished job, hand you a written report with photos, and register your repair under our 365-Day Done Right Promise.

What DuraFlex Chimney Sweep Costs in Fort Lauderdale

Here are the real numbers for DuraFlex work in the Fort Lauderdale market. These are written-quote prices, not “starting at” bait.

• Standard DuraFlex sweep with Level 1 inspection: $189 – $269 depending on liner height and access.
• DuraFlex sweep with Level 2 camera inspection: $299 – $389.
• Glaze removal on AL29-4C or heavy Stage 3 creosote: Adds $75 – $150 to the base sweep depending on chemical treatment needs.
• Rain cap replacement (OEM DuraFlex): $45 – $110 for the part, plus install labor of $60 – $90.
• Tee cleanout or reseal at the liner-to-flue transition: $120 – $210 as part of a sweep visit.

What moves the price: liner length, how many turns the flue makes, and how long it’s been since the last sweep. We give you the written number before work starts, and that’s the number on the invoice. Call (754) 354-1430 for a free estimate on your DuraFlex system.

Why Fort Lauderdale Homeowners Call Flint Chimney Co Fort Lauderdale for DuraFlex Work

Flint Chimney Co Fort Lauderdale has been part of the Garrison Partners family since 2002. We operate under the Garrison Standard, which means one thing on every job: the price is written down before the first tool comes off the truck, and the work is covered.

Every DuraFlex repair carries our 365-Day Done Right Promise. If a covered repair fails within one year of the service date, we return and fix it at no charge. No argument, no re-quoting, no fine print. Our technicians are background-checked, uniformed, and they know DuraFlex liners well enough to explain what they found in plain language, not trade jargon. If a DuraFlex liner needs replacement and we recommend an alternative like HeatShield or Gelco for a specific application, we’ll show you why on the camera footage and you approve the plan before we proceed. Hank Delano built Flint Chimney Co on one idea: tell the homeowner exactly what you found, exactly what it costs to fix, and then do the work clean.

FAQs